Efi Live License

• Efi Live Free License
• Efi Live Autocal License
• Efilive License California
• Efi Live Unlimited License
• Efi Live License Crack

Support@efilive.com - 10 - www.efilive.com V8 Scan and Tune software 1. Connect AutoCal V3 to your PC. Open V8 Scan and Tune software. Select F7: Licenses. The license number indicates the FlashScan that AutoCal is linked to. Where the license number and serial number are identical, the AutoCal device is not linked. EFILive licensing works like this for FlashScan V2: 1. You need a tuning license (GM or Cummins) to 'activate' those manufactures controllers' for your V2 - you will chose either or both during initial purchase. If you want to tune a Corvette or Duramax, you need the GM license.

• Last updated: Sep 10, 2020 by EFILive Support

Follow these steps to determine the tuning license status on your FlashScan.

1. Connect your FlashScan device to your PC.
2. Open the EFILive V8 Scan and Tune application.
3. Select the [F7: License] option in the left-hand pane.
4. Select [F2: Hardware] to display Tuning License details.
   

What does this display mean?

1. Device Summary Tabs:
   1. Firmware - displays Product type, Boot Block and Firmware Versions
   2. VIN Licenses - Installed, Used and Available license summary.
   3. Flash Counters - total number of Cal Flashes and Full Flashes performed.
2. Tuning License Summary:
   1. Scanning and Logging - activated on all FlashScan and AutoCal devices.
   2. GM Tuning - enables Flashing for GM supported vehicles.
   3. Cummins Tuning - enables Flashing for Dodge Cummins supported vehicles.
   4. Cummins HD - enables Flashing for Cummins HD supported vehicles (this option is only available of FlashScan/AutoCal V3 and FlashScan/AutoCal HD products).
   5. Pro Tuning - not yet available.

To purchase additional Tuning Licenses for FlashScan V3 or FlashScan V2;

Efi Live Free License

1. Click on the Purchase Tuning License Activation Code(s) link to order products.
2. Copy your Serial Number from the Serial Number display.
3. Enter emailed Activation Code and select Activate.

TCM Licenses are free for customers running V8.3.1 software (or later) and licensed TCMs are no longer displayed.

Efi Live Autocal License

Follow these steps to determine the VIN license status on your FlashScan .

Efilive License California

1. Connect your FlashScan device to your PC.
2. Open the EFILive V8 Scan and Tune application.
3. Select the [F7: License] option in the left-hand pane.
4. Select [F3: VINs] to display VIN License details.
   

5. For VIN License purchases, click the [Generate Auth Code] button. The Authentication Code will be shown in the Auth Code field.

Efi Live Unlimited License

Stream Licenses are only available for purchase on FlashScan V2. Where a customer purchases FlashScan V3, a Stream License Transfer service is available.

Follow these steps to determine the Stream license status on your FlashScan.

1. Connect your FlashScan device to your PC.
2. Open the EFILive V8 Scan and Tune application.
3. Select the [F7: License] option in the left-hand pane.
4. Select [F3: Streams] to display Stream License details.
   

To purchase additional Stream Licenses for FlashScan V2;

1. Click on the Purchase Activation Code(s) link to order products.
2. Select the Stream Code from the drop down list.
3. Enter the emailed Activation Code and select Activate Stream License.

Efi Live License Crack

7 of 14 people found this page helpful

Please log in or register to submit a comment.

• Last updated: Jul 14, 2021 by EFILive Support

1. Configure FlashScan V2 for BBX features if not already setup.
2. Copy selected tune file(s) from your PC to FlashScan V2 if not already copied via Quick Setup in step 1.
3. Connect your FlashScan V2 device to your vehicle.
4. Turn the vehicle ignition to the On position (not the Accessory position. Vehicle must not be cranked/running when flashing).
5. Navigate to the F2 Tune Tool -> F1 Tuning and select either F2 Program Cal or F3 Program Full menu option.
6. Using the arrow keys, navigate to the correct tune file and select OK.
7. If the controller has not been licensed by this FlashScan V2 previously, you will be presented with the License this controller now? message. Select Yes to license the controller or No to exit without licensing the controller..
   
8. Select Yes to confirm licensing the controller and commence the flash, or No to exit without licensing the controller.
   
9. When the flash process is complete the Reset Controller notification will be shown. When prompted perform the following actions:
   
   1. Turn the vehicle ignition Off.
   2. Click on the Start button to begin the countdown timer.
   3. DO NOT turn the vehicle ignition on until the countdown timer expires. This time is critical to allow the ECM to perform internal functions after a read operation.
      

3 of 7 people found this page helpful

Please log in or register to submit a comment.